Borg BLS513MK3 Handle Return Spring (2016 Onwards) - Suits 5000 Series - Box of 2
The Borg BLS513MK3 handle return spring set restores the handle return action on Borg BL5000 series mechanical digital locks, On The Bench and Easicode Pro alike. It suits locks made from 2016 onwards, which use a revised return-spring design.
It is supplied as a pack of two. For a lock made before 2016, contact us before ordering.
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- Handle return spring set for Borg BL5000 series digital locks.
- For locks manufactured from 2016 onwards.
- Suits On The Bench and Easicode Pro (ECP) BL5000 series locks.
- Supplied as a pack of two springs.
What's in the Box
- 2 x handle return springs
Item Code Family - Borg Handle Return Springs
Compatible Locks
This spring suits the Borg BL5000 series locks below where the lock was made from 2016 onwards - On The Bench and Easicode Pro, including the BL5401 DDA levers and the BL5701 and BL5771 key override locks.
The BLS703 covers the 7000 Series, and the BLS203 the 2000 Series. If the whole lock is due a refresh, the BL5000SPRING packet carries the full 33-spring internal set.
Full Specifications
Frequently Asked Questions
Borg 5000 Series locks made from 2016 onwards use a revised handle return spring. If you are unsure of the age of your lock, contact us before ordering.
This spring is for locks made from 2016 onwards. For an earlier lock, contact us before ordering.
Yes - it suits Easicode Pro locks made from 2016 onwards as well as the On The Bench 5000 Series.
Two springs let you service both handle sides, or keep a spare for later maintenance.
Additional Information
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Borg's five-page manual for the On The Bench (non-ECP) BL5000 Series - parts list, handing, inside handle reassembly and a troubleshooting table that covers a stiff lever and an outside lever dropping. (Host lock document.)
Borg's six-page manual for the BL5000 Easicode Pro range - handing, spindle fitting, the on-door code change and inside handle use. (Host lock document.)
The Australian distributor's one-page BL5000 Series accessories sheet - the keypad-only units, Lockwood conversion kits and scar plates for the 5000 Series. It does not list the handle return springs. (Host lock series document.)
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
PDF Files - BLS513MK3
Borg's five-page manual for the On The Bench (non-ECP) BL5000 Series - parts list, handing, inside handle reassembly and a troubleshooting table that covers a stiff lever and an outside lever dropping. (Host lock document.)
Borg's six-page manual for the BL5000 Easicode Pro range - handing, spindle fitting, the on-door code change and inside handle use. (Host lock document.)
The Australian distributor's one-page BL5000 Series accessories sheet - the keypad-only units, Lockwood conversion kits and scar plates for the 5000 Series. It does not list the handle return springs. (Host lock series document.)
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
