BORG BL2201KSCECP Knob Keypad Only - Easicode Pro - Satin Chrome
The Borg BL2201KSCECP is a Satin Chrome external knob keypad with Easicode Pro (ECP) on-door code changing - codes can be changed in seconds without removing the lock from the door. It is designed as a replacement unit or custom build component for the Borg BL2201 series internal lock range.
Fully mechanical with no batteries required, this keypad is intended for light to medium duty internal doors - offices, internal access doors, and controlled areas where fast, tool-free code changes are needed. It is 50,000-cycle tested and offers over 4,000 possible code combinations. It is not weather resistant and is not intended for external use.
Usually same day if ordered before 11am AEST (excluding weekends and Queensland public holidays).
This product is supplied as a knob keypad unit only. It does not include a latch, inside handle, strike plate, spindle, or fixing screws. It is designed for replacing a worn or damaged outside keypad on an existing BL2201 installation, or for custom installations where the inside hardware and latch are sourced separately. See Compatible Host Locks below for the full locks this keypad suits.
This is the ECP version, so you can change the code in seconds without removing the keypad from the door - using the code change button and the supplied change procedure. This is the practical advantage over the standard (non-ECP) tumbler keypads, which must be taken off the door and re-coded at a workbench. For the step-by-step ECP procedure, see Borg Easicode Pro: The On-Door Change and ECP Step-by-Step.
Key Features
- Replacement external knob keypad for BL2201SCECP and compatible BL2201 series internal locks.
- Easicode Pro (ECP) on-door code changing - change the code in seconds without removing the lock.
- Fully mechanical - no batteries required.
- Over 4,000 code combinations across 12 coded buttons - accepts a single PIN code.
- 50,000-cycle tested for light to medium duty internal use.
- Satin Chrome finish - cast housing with stainless steel buttons.
- Fully reversible / non-handed - suits left-hand and right-hand door configurations.
- Suits door thickness up to 60mm standard, or up to 85mm with the XL fixing kit (S227).
What's in the Box
- 1 x BL2201KSC Easicode Pro knob keypad
- 1 x Rubber gasket (weather seal between keypad and door surface)
- 1 x Accessory pack (fixing hardware)
- 1 x Code change block pin (optional use - blocks future ECP code change if fitted)
Latch, inside handle, spindle, strike plate, and full lock body are not included. This is a keypad replacement unit only. A compatible BL2201SCECP complete lock is required for new installations.
Compatible Host Locks
The BL2201KSCECP is the external knob keypad component for the following Borg BL2201 series complete lock. It replaces the outside keypad on an existing installation, or provides the keypad half for a custom build sourcing the lock body and inside hardware separately.
This keypad also suits other BL2201 ECP series tubular-latch locks. If you are replacing the keypad on an existing Borg lock, confirm the model and adaptor requirements before ordering. For a lever-handle ECP alternative, see the sibling BL2401KSCECP.
Borg 2000 Series Keypad-Only Family
BL2201KSC (standard code change) is not currently listed online - contact us for availability.
Available Finish Options
Satin Chrome
(This Product)
STK BL2201KSCECP
The Borg 2000 ECP series is also available in Polished Brass and Satin Stainless finishes on other models. This keypad is supplied in Satin Chrome.
Full Specifications
Keypad Dimensions
Frequently Asked Questions
This is the Easicode Pro (ECP) version, so the code is changed on the door without removing the keypad. You enter the current code, use the code change button, and set the new code - a process that takes under a minute. For the full step-by-step, see ECP Step-by-Step, or download the Easicode Pro instructions in the PDF Downloads section below.
The block pin is an optional component. When fitted, it disables the on-door ECP code change function - useful where you want to lock the code permanently and prevent others from changing it. Leaving it out keeps the standard ECP on-door code change available. Its use is entirely optional.
No - the BL2201KSCECP is Satin Chrome and rated for internal use only. It is not weather resistant. For external gates and coastal applications, choose a Marine Grade Pro keypad such as the BL2601KMGPRO (knob) or BL4401KMGPRO (lever), which are salt-spray tested to 1,000 hours.
No - the knob and keypad are non-handed and reverse on site without tools, so a single unit suits both left-hand and right-hand doors.
Additional Information
On-door ECP code changing makes this keypad well-suited to offices, internal access doors, and shared or controlled-access areas where the code needs updating regularly - staff changes, tenancy turnover, or periodic security refreshes. There is no need to remove the lock, so maintenance downtime is minimal. For a fuller explanation of ECP versus standard code change, see ECP Explained.
This keypad is primarily designed for the BL2201SCECP complete lock. When ordering keypad-only parts, always verify the lock body series, spindle size, and whether an adaptor kit is needed before installation. For a lever-handle version on the same platform, see the BL2401KSCECP.
The BL2201 series is designed for internal residential and light commercial doors. For high-volume commercial pedestrian traffic, consider a heavier-rated product such as the Carbine CDL7100SC. Background on mechanical digital lock selection is in the What Is a Mechanical Digital Lock? guide.
This product is covered by a 12-month manufacturer's warranty against defects in materials and workmanship. Terry's Locksmiths manages all Borg warranty claims on behalf of our customers - contact us first before returning any product. This warranty operates alongside and does not limit your rights under the Australian Consumer Law.
PDF Downloads
- Borg BL2000 ECP Series Brochure - Series overview and technical information for the BL2201 ECP range, including finishes and dimensions.
- Borg Easicode Pro (ECP) Instructions V4 - Step-by-step on-door code change procedure for Borg ECP keypads.
- Borg Locks Servicing Guide - Maintenance and servicing guidance for Borg mechanical digital locks.
What's in the Box - BL2201KSCECP
- 1 x BL2201KSC Easicode Pro knob keypad
- 1 x Rubber gasket (weather seal)
- 1 x Accessory pack (fixing hardware)
- 1 x Code change block pin (optional use)
Latch, inside handle, spindle, strike plate, and full lock body are not supplied. For a complete lock see the BL2201SCECP complete lock.
Keypad Dimensions - BL2201KSCECP
PDF Files - BL2201KSCECP
- Borg BL2000 ECP Series Brochure - Series overview and technical information for the BL2201 ECP range.
- Borg Easicode Pro (ECP) Instructions V4 - On-door code change step-by-step.
- Borg Locks Servicing Guide - Maintenance and servicing guidance.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
