Carbine CEL2-3IN1 Fire Rated Leverset with RFID and Key Override – Satin Nickel
The Carbine CEL2-3IN1-SL8SN-FRKIT is the dedicated fire door installation kit for the CEL2-3IN1 leverset, providing three access methods: touchscreen PIN code, RFID/NFC credential, and mechanical key override. It stores up to 100 combined user codes and RFID credentials in a shared pool, and is specifically packaged for certified installation on fire-rated door assemblies. No app, Bluetooth, gateway, or internet connection is required.
The leverset is designed to IP54 standards and is NCC compliant. It is certified for use on Firecore, E-Core, and Pyropanel fire-rated door systems. Fire rating certification documents are available as PDF downloads below. Always verify current certification status and confirm that all other fire door hardware is rated and compatible before installation. See: Buyers Guide Ch05: Fire Door Smart Locks · Fire door types and smart lock certification.
If Bluetooth app management is also required on a fire door, see the CEL2-BT-SL8SN-FRKIT. For non-fire door applications, see the standard CEL2-3IN1-SL8SNKIT. A Matte Black variant (CEL2-3IN1-SL8MB-FRKIT) is also available.
Firecore: FRT230184 DHAR2.0 (Warringtonfire) — Firecore TVC30 (37mm door) FRL -/60/30; Firecore TVC40 (47–48mm door) FRL up to -/120/30; valid to 20/12/2028.
E-Core and Pyropanel: See fire certification PDFs below for full certification details.
Confirm that all other hardware in the fire door assembly — hinges, door closer, intumescent seals, and strike — is also fire rated and compatible with the door system. See: Fire rating certificates · Apartment fire doors on the Gold Coast
Usually same day if ordered before 11am AEST (excluding weekends and Qld public holidays)
Available Finish Options
Satin Nickel
(This Product)
STK CEL2-3IN1-SL8SN-FRKIT
Matte Black
CEL2-3IN1-SL8MB-FRKIT →
Finish selection does not affect functionality, compliance, or performance.
Key Features
- Dedicated fire door installation kit — certified for Firecore, E-Core, and Pyropanel fire-rated door assemblies.
- Three access methods: touchscreen PIN code, RFID/NFC credential, and mechanical key override.
- Stores up to 100 combined user codes and RFID credentials (shared pool) — up from 25+25 on the original CEL-3IN1. See: Buyers Guide Ch03: RFID access
- Compatible with Mifare 13.56MHz RFID cards, FOBs, wristbands, stickers, and NFC-enabled smartphones.
- Standalone operation — no app, Bluetooth, gateway, or internet required.
- New lower-profile escutcheon with improved touchscreen and motor function — CEL2 generation.
- Guiding code, double authorisation, vacation mode, passage mode, auto-lock 5–99 seconds.
- NCC compliant SL8 lever. IP54 rated. ANSI Grade 2.
- Fits standard 54mm lockset hole; door 35–51mm; backset 60–70mm adjustable. See: Buyers Guide Ch02: Measuring your door
Access Methods
Works on 13.56MHz Mifare NFC (ISO14443 Type A) — RFID cards, FOBs, wristbands, stickers, and most NFC-enabled Android phones. Australian Mifare transit cards (Go card, Opal, Myki, SmartRider, MyWay, metroCard) are compatible. Visa PayWave and Mastercard PayPass are NOT compatible (ISO14443 Type B). If your phone’s NFC chip is incompatible, a Mifare RFID sticker on the back of the phone is the recommended workaround. See: Carbine CEL RFID Application List (PDF) · Buyers Guide Ch03: Access Methods
Suitable Uses
- Firecore, E-Core, and Pyropanel fire-rated door assemblies in residential, strata, and commercial buildings requiring PIN and RFID access. See: Buyers Guide Ch05: Fire door core types
- Apartment and strata fire-rated entry doors with NCC lever compliance requirements. See: Apartment fire doors on the Gold Coast
- Emergency exits and fire escape corridors requiring certified hardware with RFID card access for residents and RFID override for management.
- Fire-rated doors where a simple standalone solution is preferred and Bluetooth app management is not required.
- Sites requiring RFID card handover for cleaners, contractors, or regular service personnel on a fire-rated entry door.
See also: Asbestos in Gold Coast apartment fire doors · Buyers Guide Ch02: Measuring Your Door · Check clearance between door and security screen
What’s in the Box
- 1 × exterior electronic module with touchscreen keypad
- 1 × interior lever handle assembly
- 1 × tubular latch (60–70mm adjustable backset)
- 1 × C4 keyway cylinder (6-pin, keyed to 5-pin key)
- 2 × mechanical keys
- 2 × RFID key cards
- 1 × user manual and installation guide
- 1 × set of fixing screws
- 4 × AA alkaline batteries (Duracell Procell)
Note: When installing on fire-rated doors, confirm all supplementary hardware (hinges, closer, seals, strike) is fire rated and compatible with the door system and FRL.
Carbine CEL / CEL2 / CDL2 – Complete Product Family
CEL2-BT deadbolt: RFID not available — Bluetooth and PIN only. CDL2: membrane keypad, no RFID. All KIT numbers include batteries. See: Carbine CEL & CDL Digital Lock Range — Complete Buyer’s Guide
Accessories & Retrofit Plates
Full Specifications
Key Dimensions
Battery, Power & Backup Access
- Powered by 4 × AA alkaline batteries (Duracell Procell recommended). Do not use lithium or rechargeable batteries.
- Battery life approx. 5,000 openings. Low battery warning via LED and audible tone before depletion. See: How long do digital door locks last?
- Mechanical key override provides physical backup entry at all times — critical on fire doors where loss of electronic access must never prevent egress.
Frequently Asked Questions
Both models carry fire rating certifications, but this kit (the FRKIT) is specifically packaged for certified fire door installation. If you are installing on a certified fire-rated door assembly, specify this kit. For non-fire door applications, the standard CEL2-3IN1-SL8SNKIT is appropriate. See: Buyers Guide Ch05: Fire Door Smart Locks
No. This is a standalone model — PIN and RFID only. For Bluetooth app management on a fire-rated door, see the CEL2-BT-SL8SN-FRKIT. See: Buyers Guide Ch08: Gateway Comparison
The CEL2-3IN1 fire rated leverset is certified for Firecore door assemblies (FRT230184 DHAR2.0, Warringtonfire — TVC30 FRL -/60/30; TVC40 up to FRL -/120/30, valid 20/12/2028). E-Core and Pyropanel certification documents are also provided as PDF downloads below. Confirm all certs are current before specifying. See: Fire door types and smart lock certification
Most NFC-enabled Android phones with Mifare support work. Visa PayWave and Mastercard PayPass are not compatible. If incompatible, use a Mifare RFID sticker adhered to the back of the phone. See: Carbine CEL RFID Application List (PDF) · Buyers Guide Ch03: RFID access
No. Outside these ranges the lock is not compatible. See: Buyers Guide Ch02: Measuring Your Door · How to measure your backset
Additional Information
The lock certification covers the lockset only. All other hardware in the fire door assembly must also be rated and compatible — hinges, door closer, intumescent seals, and strike. Confirm the complete hardware schedule with your fire door supplier or certifier before ordering. Verify all fire rating certificates are current before installation. See: Fire door types and smart lock certification · Fire rating certificates · Apartment fire doors on the Gold Coast
Fire doors in older Gold Coast apartment buildings (pre-1990) may contain asbestos in the core or surrounding frame. Do not drill or cut without confirming the door material first. See: Asbestos in Gold Coast apartment fire doors
The connecting cable between the exterior and interior modules must be correctly seated in the mounting plate channel. Incorrect routing is the most common installation failure — it causes an unresponsive keypad or a battery cover that won’t seat correctly. Check cable routing first if the keypad stops responding after installation. See: 3 common DIY smart lock installation mistakes
The factory default programming code is 12345678. Change it to a private code immediately after installation. Issue separate user codes or RFID cards for day-to-day access; never share the programming code with tenants or users. See: The realities of electronic door locks
Terry’s Locksmiths offers supply and installation on the Gold Coast, including fire door assessments. See: Site survey and installation services. For self-installation: Buyers Guide Ch12: Installation & Troubleshooting
Carbine products are backed by Davcor Group Pty Ltd, the Australian manufacturer and owner of the Carbine brand, distributed locally through Lock and Key Co. Warranty periods vary by product category:
- Up to 15 years — mechanical hardware, door hardware, cabinet furniture, utility and window locks
- 10 years — padlocks and mechanical digital locks
- 5 years — cylinders and keys
- 12 months — electronic and digital locks, locksmith tools and supplies
Carbine CEL2-3IN1 Leverset – Installation Instructions
Carbine CEL2-3IN1 Leverset – Programming Instructions (User Guide)
Carbine CEL2-3IN1 – Product Brochure (Range Overview)
Carbine CEL2-3IN1 – Troubleshooting Guide
Fire Certification – Firecore (FRT230184 DHAR2.0, Warringtonfire)
Fire Certification – E-Core (Jensen Hughes)
Fire Certification – Pyropanel (Warringtonfire)
Carbine CEL RFID Application List
What’s in the Box – CEL2-3IN1-SL8SN-FRKIT
- 1 × exterior electronic module with touchscreen keypad
- 1 × interior lever handle assembly
- 1 × tubular latch (60–70mm adjustable backset)
- 1 × C4 keyway cylinder (6-pin, keyed to 5-pin key)
- 2 × mechanical keys
- 2 × RFID key cards
- 1 × user manual and installation guide
- 1 × set of fixing screws
- 4 × AA alkaline batteries (Duracell Procell)
Carbine CEL2 Lever Set - Dimensions
Carbine CEL2-3IN1 – Product Brochure
Carbine CEL2-3IN1 Leverset – Installation Instructions
Carbine CEL2-3IN1 Leverset – Programming Instructions (User Guide)
Carbine CEL2-3IN1 – Product Brochure (Range Overview)
Carbine CEL2-3IN1 – Troubleshooting Guide
Fire Certification – Firecore (FRT230184 DHAR2.0, Warringtonfire)
Fire Certification – E-Core (Jensen Hughes)
Fire Certification – Pyropanel (Warringtonfire)
Carbine CEL RFID Application List
Carbine Warranty
Carbine is a flagship brand of Davcor Group Pty Ltd (ABN 95 003 562 598) — an Australian manufacturer, designer, and wholesale distributor of residential and commercial locking hardware. Engineered in collaboration with working locksmiths, Carbine products focus on high security, versatility, and ease of installation.
Davcor distributes Carbine through seven specialist divisions, including Lock and Key Co. — Davcor’s dedicated trade distribution arm supplying locksmiths and the security industry across Australia, New Zealand, and beyond. Whether you purchased your Carbine product through Lock and Key Co., another trade channel, or directly through us, the same Davcor warranty applies.
All Carbine products are guaranteed by Davcor Group Pty Ltd to be free from defects in materials and workmanship from the date of original purchase, for the period applicable to the specific product category (refer to the Warranty Period table below). This warranty covers replacement of product only.
Warranty Summary
Warranty Periods by Product Category
Source: Davcor Warranty Against Defects — Appendix A. Warranty period runs from the date of original purchase.
How to Make a Claim
- Contact Terry’s Tradies Pty Ltd (the place of purchase) in writing as soon as the defect becomes apparent — and no later than 14 days after the end of the applicable warranty period.
- Include in your written claim: a description of the defect, the date of supply, your contact details, and satisfactory proof of purchase.
- Do not return the product until a return authorisation number has been issued by Davcor. If return is required, the product must be in its original, complete, and saleable packaging.
- Davcor will test and assess the product. No claim is valid unless Davcor has confirmed a defect is present.
- Once a valid claim is confirmed, Davcor will — at its discretion — repair the defect, replace the product, or supply an equivalent product. If repair or replacement cannot be completed within a reasonable time, you may request a full refund, provided the product has been returned.
Delivery inspection: If you believe a product is defective or incorrectly supplied at the time of delivery, telephone notice must be given within 72 hours of receipt, with written notice (including full particulars) within 14 days of the invoice date.
Exclusions
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure, and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. The Carbine/Davcor express warranty operates alongside and in addition to your rights under the Australian Consumer Law.
Further Information
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
