Borg Digital Lock Spindle - Standard - Suits Borg 2000 Series
The Borg Digital Lock Spindle (Standard) is the drive spindle for the Borg 2000 Series mechanical digital locks. It is a flat bar spindle that turns the follower between the outside keypad and the inside handle. This is the standard-length spindle, which suits most doors of ordinary thickness.
It is supplied as a single spindle only, with no keypad, handle or latch. On a deeper door, choose the long spindle instead so the follower stays fully engaged.
This spindle is a special-order item and is not returnable. It is brought in to order, so please confirm the correct part and length before you buy.
Key Features
- Flat bar drive spindle for Borg 2000 Series mechanical digital locks.
- Standard length, for doors of ordinary thickness.
- Also used across Borg 4000 Series installations.
- Supplied as an individual spindle component, no keypad or handle.
- Direct replacement for a worn or incorrectly sized spindle.
Compatibility - What This Fits
This spindle drives the Borg 2000 Series knob and lever locks, including BL2000SC, BL2000PB, BL2200, BL2201SCECP, BL2005SC, BL2020SC, BL2301SC and BL2401SCECP, and it is also used across Borg 4000 Series installations. On a thicker door, use the long spindle instead; for extra-thick doors and gates there is the XXL extended spindle kit. Not sure how to measure? See measuring your door.
The marine-grade 2600 range uses its own stainless 100 mm spindle, and mortice conversions use the mortice-lock spindle. For the complete spares set, see the 2000 Series accessories packet or read Chapter 16, Mechanical Digital Locks.
What's in the Box
- 1 x Borg flat bar drive spindle (standard length)
Suitable Uses
Use this spindle when installing or servicing a Borg digital mechanical lock on a standard-thickness door, or to replace a worn or wrong-length spindle. It is one of the Borg lock spare parts we keep for the 2000 Series.
Item Code Family - 2000 / 2600 Series Spindles
Full Specifications
Frequently Asked Questions
The standard spindle suits doors of ordinary thickness. If the handle will not sit tight against the door or the follower barely engages, step up to the long spindle. Measure the door leaf first - see measuring your door.
No. This is the drive spindle only. The 2000 Series accessories packet carries the wider spares set.
No. The 2600 range uses the stainless 100 mm spindle. This standard spindle is for the 2000 Series.
Additional Information
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
The full installation and code-change manual for the Borg 2000 Series locks this part is fitted to - parts list, spindle selection, latch bore, and strike preparation.
General servicing guide for Borg mechanical digital locks - useful when replacing worn spindles, latches and strike components in the field.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
