Lockton Cadell52 Fire Rated Smart Lock - 60mm Mortice
The Lockton Cadell52 is a heavy-duty electronic lever lock system from Lockton's E-Series range. This complete kit pairs the Cadell52 smart lock handle set with the SG-ML60 60mm backset mortice lock, providing a ready-to-install solution for commercial and residential doors. The Cadell52 is certified to AS 4145.2 (locksets) and AS 1905.1:2015 (fire door hardware), achieving a physical security rating of SL8 and a durability rating of D8 (500,000 cycles) - making it suited for high-traffic commercial installations including apartment blocks, schools, offices, hospitals and private residences.
Six access methods are supported out of the box: fingerprint biometrics, PIN code, RFID key fob, Bluetooth via the TTLock App (iOS and Android), mechanical key override via a 6-pin C4 rekeyable oval cylinder, and Wi-Fi remote access when paired with an optional TTLock gateway. The TTLock app supports unlimited Bluetooth users, unlimited customised PIN codes, up to 1,000 RFID fobs, and up to 100 fingerprint users. All six access methods are fully functional without a gateway; an optional gateway (G2-G5) adds remote unlock and access management from anywhere in the world. Not sure if you need a gateway? See our Gateway Comparison guide.
The Cadell52 is designed to retrofit over most standard Australian mortice furniture installations, with fixing posts positioned to match standard post spacing. It can replace most existing knobsets, leversets, and deadbolt combinations. Scar plates in three sizes are available separately to cover legacy fixing holes. Available in Matte Black and Satin Stainless Steel. If E-Core or Hallmark (NZ) fire door certification is required, see the Cadell52 ML95 kit.
The Cadell52 kit (with SG-ML60 mortice) has been tested and certified by an independent third-party accredited testing laboratory. Fire rating: Firecore (AU) - up to 2 hours. Tested and declared by SIEPER Group. Use on fire doors only with all other hardware in the assembly also fire rated and certified for the Firecore door system. For E-Core or Hallmark (NZ) certification, the Cadell52 ML95 kit carries all three.
Disability Access Compliance (DDA)
- The Cadell52 lever handle design complies with the disability access requirements of AS1428.1-2009 (DDA) (Design for access and mobility).
- The clutching lever handle assists users with limited grip strength or reduced manual dexterity.
- DDA compliance relates to the lever handle design only and does not imply full building access compliance for the complete installation. Read: Smart Locks for NDIS, DDA & Accessibility
Per the manufacturer's specification and confirmed by distributor SIEPER Group, the Cadell52 carries an IP66 rating on both the external (outside) and internal (inside) handles. IP66 confirms protection against powerful water jets and complete dust ingress protection. This makes the lock suitable for wet or exposed environments - and is a significant advantage where most competitors rate only the external keypad.
Key Features
- Six access methods: fingerprint, PIN code, RFID key fob, Bluetooth/TTLock App, Wi-Fi remote access (gateway optional), and 6-pin C4 oval cylinder key override.
- IP66 rated on both external and internal handles - suitable for wet, exposed, or harsh environments.
- D8 durability rating - tested to 500,000 operating cycles; SL8 physical security rating. Rated for heavy commercial traffic.
- Fire rated for Firecore (AU) door assemblies up to 2 hours - certified to AS 1905.1:2015 and AS 4145.2.
- DDA compliant lever handle design - AS1428.1-2009.
- Unlimited Bluetooth users and unlimited customised PIN codes, managed via the TTLock App.
- Up to 1,000 RFID key fobs programmable; up to 100 unique fingerprint users. Additional spare RFID fobs available separately.
- PIN code length: 4 to 9 digits.
- Optional TTLock gateway (G2-G5) enables remote unlock, access scheduling, and full access history from anywhere in the world.
- 6-pin C4 rekeyable oval cylinder included; convertible to restricted key profiles.
- Designed to retrofit directly over standard Australian mortice furniture post spacing - replaces most existing knobsets, leversets, and deadbolt combinations. Scar plates available for legacy preparation coverage.
- Inside handle configurable with flush stainless steel insert (default) or turn snib (conversion kit included).
- Three screw/spindle packs included - supports door thickness 32-60mm without additional hardware.
- Smart alarm function can be configured in the TTLock App. Note: disable Tamper Alert in the TTLock App for Australian hardware.
- Available in Matte Black and Satin Stainless Steel.
Access Methods
What's in the Box
- 1 x Cadell52 smart lock handle set (outside handle + inside handle)
- 2 x RFID key fobs
- 3 x Screw/spindle packs - for door thickness 32-40mm, 40-50mm, and 50-60mm
- 4 x AAA alkaline batteries
- 1 x SG-ML60 60mm backset mortice lock
- 1 x 50mm 6-pin C4 oval cylinder with 2 x C4 keys (Art. 410/50-BLK-KD)
- 1 x Turn snib conversion kit
- 1 x Fitting template
- 1 x Instruction manual
Suitable Uses
- Commercial entry and internal doors requiring fire door certification (Firecore)
- Apartment and strata building entry doors requiring DDA-compliant lever hardware
- Schools, offices, retail, industrial, and medical facilities - heavy traffic applications
- Residential entry and internal doors requiring commercial-grade smart lock functionality
- Retrofit of existing Australian mortice lock furniture installations (confirm your 60mm backset before ordering)
- Any application requiring IP66-rated hardware on both internal and external faces
- Multi-credential access installations where fingerprint, PIN, fob, app, and key override are all required - including Airbnb and short-stay rental properties
Available Finishes
Matte Black
CADELL52-BLK-ML60
Satin Stainless Steel
CADELL52-SSS-ML60
Cadell52 E-Series - Product Family
Both products available in Matte Black (BLK) and Satin Stainless Steel (SSS). Handle set, electronic components, access methods, and specifications are identical across all variants.
Full Specifications
Dimensions
Battery and Power
- Powered by 4 x AAA alkaline batteries, included in the kit.
- Battery life is approximately 1 year at 10-20 uses per day under normal conditions. How long do digital door locks last?
- The TTLock App displays the current battery level when Bluetooth is active, providing advance warning before depletion.
- Audio and LED indicators provide low battery alerts directly on the lock.
- There is no USB-C emergency power port on this model. If batteries are fully depleted, access is via the mechanical key override using the supplied C4 oval cylinder and key.
App Control and Remote Access (Optional Gateway)
The Cadell52 connects to the TTLock App (iOS and Android) via Bluetooth. Within Bluetooth range, the app can unlock the door, manage user credentials, issue temporary PIN codes, and configure lock settings. No gateway is required for any of these functions.
For remote access from anywhere in the world - including remote unlock, access scheduling, and access history review - an optional TTLock gateway must be connected to your internet router. Five gateway models are available depending on your connectivity requirements. Compare all gateway models in detail or read our Gateway Comparison guide:
- G2-GATE - WiFi 2.4GHz gateway (most common residential choice)
- G3-GATE - Ethernet (RJ45) gateway
- G3P-GATE - Power over Ethernet (PoE) gateway
- G4-GATE - 4G SIM gateway (no fixed internet required)
- G5-GATE - Dual-band WiFi 2.4GHz / 5GHz gateway
All gateways are sold separately. Gateway Bluetooth range to lock: 10-15 metres.
Accessories & Spares
Frequently Asked Questions
No. All six access methods - fingerprint, PIN code, RFID fob, Bluetooth/TTLock App, key override, and the built-in lock functions - work without a gateway. A TTLock gateway (G2-G5, sold separately) is required only if you want to unlock remotely via the internet, schedule time-limited access, or review access history from outside Bluetooth range. Read our full Gateway Comparison guide.
Yes, for Firecore (AU) fire door assemblies up to 2 hours. The CADELL52-BLK-ML60 and CADELL52-SSS-ML60 kits have been tested and certified by an independent accredited laboratory to AS 4145.2 and AS 1905.1:2015. When specifying for fire doors, confirm that all other hardware in the assembly - hinges, seals, closers - is also fire rated and certified for the Firecore system. If E-Core or Hallmark (NZ) certification is required, see the Cadell52 ML95 kit which carries all three certifications.
In most cases, yes. The Cadell52 fixing posts are positioned at standard Australian mortice furniture post spacing, so it will drop over most existing commercial mortice furniture installations. If your existing lock leaves larger or off-centre holes, scar plates in three sizes (Art IDs: PS-REC-52-1, PS-REC-52-2, PS-REC-52-3) are available separately to cover legacy fixings cleanly. See also the scar plate guide.
The 50mm oval cylinder (Art. 410/50-BLK-KD) supplied in the kit is correct for door thicknesses of 32mm to 64mm. How to measure your backset. For doors 64mm to 90mm thick, order the 62mm oval cylinder (Art. 410/62-BLK-KD) separately. Do not use a cylinder that is too short for the door thickness, as this will prevent the key from correctly actuating the mortice lock cam.
Yes. The inside handle comes pre-configured with a flush stainless steel insert for passage function (free egress at all times). The included turn snib kit allows the inside handle to be converted to a turn snib, enabling the inside handle to lock the latch and prevent egress. Important: read about the risks of the internal snib on smart locks before enabling this feature. Both the flush insert and the turn snib kit are included in the box at no additional cost.
Additional Information
The Cadell52 ML60 kit is certified for use on Firecore (AU) fire door assemblies only - not E-Core or Hallmark (NZ). All hardware in the assembly - hinges, seals, closers, strikes - must also be independently fire rated and suitable for the Firecore door system. Do not install on E-Core or Hallmark (NZ) assemblies with the ML60 kit; use the ML95 kit for those systems. See also: Apartment Fire Doors on the Gold Coast - The one-penetration rule for fire doors - Asbestos risk in Gold Coast fire doors
Three oval cylinder scenarios apply to this product: (1) If fitting the cylinder into the Cadell52 outside handle directly (not into the mortice lock), use a 34mm oval cylinder (Art. 410-BLK-KD, not included). (2) If fitting the cylinder into the mortice lock for door thickness 32-64mm, use the 50mm cylinder included in the box (Art. 410/50-BLK-KD). (3) For door thickness 64-90mm, order the 62mm cylinder separately (Art. 410/62-BLK-KD). Using the wrong cylinder length will result in incorrect key function or cam engagement failure.
The Cadell52 is designed to fit over most Australian commercial mortice furniture with standard post spacing. Measure your door before ordering and confirm post spacing against the supplied fitting template before chiselling or drilling. See our DIY installation guide. If the existing lock leaves a hole pattern that doesn't align with the Cadell52 fixing posts, a scar plate is required. Three plate sizes are available - measure the existing hole pattern before ordering.
IP66 confirms complete protection against dust ingress and protection against powerful water jets from any direction on both the external and internal handles. This is a significant advantage in applications where the internal handle may be exposed to moisture - such as covered external corridors, commercial kitchens, or humid environments. IP66 does not mean submersion-proof - do not immerse the lock in water.
The Cadell52 outside handle uses a rubber gasket against the door surface as part of its water-resistant seal. When fitting the outside handle over the oval cylinder, resistance will be felt as the gasket seats - this is normal and expected. Push the handle firmly and evenly until fully seated. Do not use excessive force with tools on the face of the handle; apply pressure to the body only.
Lockton (SIEPER Group) warrants the Cadell52 against defects in materials and workmanship for:
- 10 years - mechanical components
- 3 years - electronic components
Purchased through Terry's Locksmiths? Contact Terry's Locksmiths first - we'll manage your warranty claim on your behalf. Returns & Warranty | Lockton Warranty Statement
What's in the Box - Cadell52 Complete Kit with 60mm Mortice
- 1 x Cadell52 smart lock handle set (outside handle + inside handle)
- 2 x RFID key fobs
- 3 x Screw/spindle packs - for door thickness 32-40mm, 40-50mm, and 50-60mm
- 4 x AAA alkaline batteries
- 1 x SG-ML60 60mm backset mortice lock
- 1 x 50mm 6-pin C4 oval cylinder with 2 x C4 keys (Art. 410/50-BLK-KD)
- 1 x Turn snib conversion kit
- 1 x Fitting template
- 1 x Instruction manual
Lockton Cadell52 Smart Lock - Real Installations
Lockton Cadell52 - Dimensions
Lockton Cadell52 - Product Brochure
Lockton Warranty
Lockton Security products are designed and manufactured to high standards of quality, durability, and performance. All Lockton branded products come with guarantees in accordance with the Australian Consumer Law, and additional warranties are offered as detailed below.
Warranty Summary
Warranty periods run from the date of purchase. Proof of purchase is required for all claims.
How to Make a Claim
Lockton products are sold exclusively through trade channels. End-users who have received a Lockton product via an installer or trade supplier should contact their installer in the first instance — the trade supplier will liaise with Lockton Security to process the claim on your behalf.
To lodge a warranty claim through Terry’s Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (including Gold Coast Smart Locks), please follow these steps:
- Contact us with details of the defect and, where possible, installation images.
- Supply your proof of purchase (invoice number or receipt).
- Provide contact details for claim updates.
- A Goods Return Number (GRN) will be obtained from Lockton Security on your behalf.
- Package the product securely, include the GRN, and return it as directed. Products returned without a GRN may not be accepted.
Once a correctly submitted claim is assessed by Lockton Security and approved, they will at their own cost and discretion either: repair and return the product; provide a replacement or similar product; supply refurbished goods of equivalent type and quality (covered under the remaining warranty period); or refund the purchase price. If the claim is not approved, Lockton Security will advise in writing and the product will be returned at the customer’s expense, or recycled upon request.
Exclusions
The Lockton warranty does not cover:
- Damage caused by improper use or incorrect product selection
- Improper installation
- Fair wear and tear
- Environmental conditions outside product specifications (e.g. coastal air, high humidity, or exposure to corrosive substances)
- Products that have been modified, repaired, or altered
- Use of non-genuine replacement parts or accessories
- Batteries (no warranty applies)
Important Notes
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Lockton manufacturer warranty is offered in addition to, and does not limit, these statutory rights.
Further Information
Returns & Warranty — goldcoastsmartlocks.com.au
Lockton Security — Warranty Statement
1 Review Hide Reviews Show Reviews
-
Love the digital lock
Ordered this digital lock for my home, it is fire rated, perfect for my apartment. It looks sophisticated, fulfilled my needs for my home. Overall, love it, highly recommend!
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
