McGrath TGFP70 Access Control Keypad with Fingerprint and Built-In Wi-Fi - Silver
The McGrath TGFP70 is a standalone access control keypad with a tempered glass touchscreen, integrated fingerprint reader and built-in 2.4GHz Wi-Fi. Hardwired at 12 volt DC, it controls electric strikes, automatic doors, garage doors and gates via relay output, with remote management available through the McGrath Locks App from anywhere - no separate gateway required.
With a 68mm wide zinc alloy body and support for fingerprint, PIN code, RFID credentials and Bluetooth eKeys, the TGFP70 delivers high-capacity multi-method access control in a single device. Its standout specification is an RFID capacity of 20,000 credentials - substantially higher than most comparable controllers - making it well suited to commercial and multi-user installations.
Usually same day when ordered before 11am AEST (excluding weekends and QLD public holidays).
Fingerprint
PIN Code
RFID Card / Fob
Bluetooth eKey
Built-in Wi-Fi
Key Features
- Built-in 2.4GHz Wi-Fi for remote access and management - no gateway required.
- Capacitive touch tempered glass keypad screen.
- Integrated fingerprint reader - stores up to 500 fingerprints.
- High-capacity RFID storage: up to 20,000 credentials (13.56MHz MIFARE).
- Stores up to 150 PIN codes (4 to 9 digits).
- Unlimited Bluetooth eKeys issued via the McGrath Locks App.
- Anti-peep code function to prevent PIN observation.
- Incorrect-attempt lockout for protection against brute-force entry.
- Reset button can be disabled in the app for additional security.
- Passage mode to hold the relay open when required.
- Audit trail in the app showing who accessed the entry and when.
- IP66 rated zinc alloy housing for exposed outdoor installation.
- Supplied with 2 x RFID fobs.
Explore our full range of smart keypads and access control accessories including standalone controllers, wireless keypads, and fingerprint readers.
View all smart keypad options
The TGFP70 is a standalone hardwired access controller - not a door lock and not a wireless accessory keypad. All credentials (fingerprints, PIN codes, RFID cards, Bluetooth eKeys) are stored internally within the device. When a valid credential is presented, the TGFP70 activates its internal relay (NO / NC / COM) to release a connected electric strike, magnetic lock, gate motor, garage door or automatic door.
Unlike the TGFP43, the TGFP70 has built-in Wi-Fi and connects directly to the McGrath Locks App for remote management without needing a separate gateway. User enrolment, access scheduling, audit trails and credential management are all handled over Wi-Fi from anywhere.
Access Methods
The Access Methods chapter of our Smart Lock Buyer's Guide covers fingerprint, PIN, RFID and Bluetooth in depth, including where each credential type excels in practice.
McGrath Locks App
The TGFP70 is managed through the McGrath Locks App, McGrath's customised build on the TTLock platform (also compatible with TTHotel for hospitality and managed accommodation use). The app handles user enrolment, credential issue and revocation, time-limited and one-time passcodes, passage mode, scheduling, and audit trails - all over the keypad's built-in Wi-Fi without needing an external gateway or bridge.
The McGrath Locks App is available on both Apple and Android devices (iOS 7.0 and above, Android 4.3 and above). For day-to-day platform guidance see the TTLock Platform Guide and TTLock Tips and Tricks. For short-stay rental use, see Using TTLock for Airbnb in Australia.
Power & Wiring
- Hardwired 12 volt DC input.
- Relay output terminals: NO / NC / COM.
- Relay contact rating: less than 2A at 12 volt DC.
- Motor working current: less than 80mA.
- Suitable for fail-safe and fail-secure lock wiring.
The TGFP70 is a hardwired 12 volt installation. For wiring and power-supply guidance, the Installation & Troubleshooting chapter covers the key considerations. Our site survey and installation service is also available on the Gold Coast.
Environment & Construction
- IP66 rated for exposed outdoor installations.
- Zinc alloy construction with tempered glass touchscreen.
- Operating temperature: -30°C to +60°C.
- Operating humidity: 0% to 85% RH.
For background on IP ratings and what they mean in Australian conditions, see the Australian Standards chapter.
Suitable Uses
- Access control for electric strikes and magnetic locks on doors and gates.
- Controlling garage doors, automated doors and gate motors via relay output.
- High-volume commercial and multi-user installations needing up to 20,000 RFID credentials.
- Sites requiring built-in Wi-Fi remote management without a separate gateway or bridge.
- Hospitality and managed accommodation where TTHotel integration is needed.
- Outdoor and exposed installations where an IP66 rated metal-body keypad is required.
Available Finish Options
Silver
(This Product)
STK MLKPTGFP70SL
Finish selection does not affect functionality, compliance, or performance.
Item Code Family - Access Control Range
Compatible RFID Credentials
The TGFP70 reads 13.56MHz MIFARE credentials and ships with 2 RFID fobs. McGrath's full MIFARE 1K range can also be enrolled on the reader:
Full Specifications
Dimensions
TGFP70 Keypad: 140mm (H) × 68mm (W) × 25mm (D)
What's In The Box
- 1 x McGrath TGFP70 access control keypad
- 2 x RFID fobs
Frequently Asked Questions
No. The TGFP70 is a standalone access controller. It does not include a lock, deadbolt or latch. It releases a connected electric strike, magnetic lock, gate motor, garage door or automatic door via its built-in relay output.
No. The TGFP70 has built-in 2.4GHz Wi-Fi and connects directly to the McGrath Locks App from anywhere without a gateway. This is a key difference from the TGFP43, which requires a separately purchased gateway for remote access.
The TGFP70 stores up to 20,000 RFID credentials - substantially more than most comparable access-control keypads. McGrath's MIFARE 1K cards, fobs, stickers and wristbands all work on the 13.56MHz MIFARE reader.
Up to 500 fingerprints. This is higher than the TGFP43 (100 fingerprints) and matches the RBH52 (500 fingerprints).
The TGFP70 is a 12 volt hardwired device with a relay driving separate locking hardware. Installation is more involved than a battery smart lock - a qualified electrician or licenced locksmith is recommended. See our site survey and installation service if you are on the Gold Coast.
McGrath smart locks and access control are backed by long-established Australian industry partners and supported locally by Terry's. To understand why we back the McGrath range long-term, read Why Terry's, LSC and McGrath Locks Give Long-Term Confidence, or see the McGrath section of our Brand Profiles chapter.
Additional Information
The TGFP70's defining advantage in the McGrath hardwired keypad family is its combination of built-in Wi-Fi (no gateway required), 500 fingerprints and 20,000 RFID credentials. The 20,000-credential RFID pool is the headline spec: at most commercial and multi-tenancy sites the practical ceiling is the management overhead, not the hardware limit. If your installation has frequent credential turnover - managed accommodation, strata access, co-working, or high-traffic commercial - the TGFP70 removes the need to manage that ceiling.
Compared with the TGFP43, the TGFP70 is wider (68mm vs 43.5mm), includes built-in Wi-Fi, stores 500 vs 100 fingerprints, and holds 20,000 vs 1,000 RFID credentials. Compared with the RBH52, the TGFP70 offers a capacitive glass touchscreen and 20x the RFID capacity (20,000 vs 1,000), at the cost of the RBH52's external Wi-Fi antenna design. For buyers comparing the full platform across brands, the App Platforms chapter and Which App Platform Is Right for You are the recommended starting points.
Warranty
12-month warranty against defects in materials and workmanship (24-month on ALBION, ASCOT, WINDSOR, ULTRA SECUA, HAMILTON, BARDON and STAFFORD models). McGrath Locks will repair, replace, or refund at their discretion. Proof of purchase required for all claims. Returns & Warranty | McGrath Locks Warranty
What's In The Box - McGrath TGFP70
- 1 x McGrath TGFP70 access control keypad
- 2 x RFID fobs
McGrath TGFP70 - Product Brochure
McGrath Locks Warranty
Warranty Summary
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (the place of purchase) within the applicable warranty period.
- Supply your proof of original purchase — a receipt or tax invoice is required.
- Provide a clear description of the fault and your contact details.
- You may be asked to return the product for assessment before a remedy is determined.
- McGrath Locks will, at their discretion, repair the product, replace it with the same or an equivalent model, or provide a refund of the purchase price.
Exclusions
This warranty does not cover:
- Normal wear and tear
- Products that have been disassembled
- Damage caused by improper handling, incorrect installation, misuse, abuse, neglect, modification, or accident
- Installation by unlicensed persons (including non-licensed locksmiths or technicians)
- Products not used in accordance with the supplied instructions
- Cosmetic damage that does not affect functionality
- Labour or installation costs related to the removal or reinstallation of products
- Exposure to conditions outside normal environmental use
- Work completed before warranty approval
- Damage caused by battery leakage, battery failure, or force majeure
Important Notes
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to your rights and remedies under the Australian Consumer Law.
Further Information
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
