Lockton E-Series Turn Knobs to Suit ELEV36 Smart Lock - Silver (Pair)
The Lockton ELEV36-SLHD-SIL is a pair of Silver turn knobs designed to replace the standard lever handles on the Lockton ELEV36 Hinged Smart Lock. Each knob measures 58 x 29.6 mm and fits the 8 mm square spindle drive of the ELEV36 lock body.
The primary use case is converting an ELEV36 Hinged installation to a knob-both-sides configuration — either as a stylistic choice or where a lever handle would create insufficient clearance against an adjacent wall, architrave, or screen door frame. The knobs can also be specified at time of order as part of an ELEV36 HK (Hinged with Knob) kit, but this listing provides the replacement pair for existing ELEV36 installations or post-installation conversions.
Available in Silver (this product) and Black (ELEV36-SLHD-BLK). Distributed by Sieper Group (sglocks.com.au).
Key Features
- Genuine Lockton replacement turn knobs — designed and specified for the ELEV36 E-Series Smart Lock
- Supplied as a pair (2 knobs per pack) — covers both internal and external handle positions
- Compact knob dimensions: 58 mm (L) x 29.6 mm (W) — suitable where lever clearance is restricted
- 8 mm square spindle drive — matches the ELEV36 lock body spindle interface directly
- Silver finish coordinates with the Silver ELEV36 variant range (ELEV36-SIL-H and ELEV36-SIL-HK series)
- Passive mechanical accessory — no battery, no electronics, no app required; the ELEV36 lock body and its electronic functions are unaffected by handle type
- Also compatible with ELEV36 Sliding Door installations where a knob configuration is preferred over the standard lever
Suitable Uses
Available Finish Options
Silver
(This Product)
ELEV36-SLHD-SIL
Finish selection does not affect functionality or compatibility. Match finish to your ELEV36 lock variant — Silver knobs coordinate with the Silver ELEV36 range; Black knobs with the Black ELEV36 range.
Lockton ELEV36 Turn Knob Range
| Item Code | Description | Finish | Qty |
|---|---|---|---|
| ELEV36-SLHD-SIL | Lockton E-Series Turn Knobs to Suit ELEV36 - Silver | Silver | Pair (2) |
| ELEV36-SLHD-BLK | Lockton E-Series Turn Knobs to Suit ELEV36 - Black | Black | Pair (2) |
Both variants share identical dimensions and spindle geometry. For the full ELEV36 range including complete lock kits, scar plates, rebate kits, RFID fobs, and the G2 Gateway, see the ELEV36 Hinged Smart Lock page.
Full Specifications
| Specification | Value |
|---|---|
| Item Code | ELEV36-SLHD-SIL |
| Pack Contents | 2 x turn knobs (pair) |
| Knob Dimensions (L x W) | 58 mm x 29.6 mm |
| Spindle Size | 8 mm square |
| Finish | Silver |
| Compatible Lock | Lockton ELEV36 E-Series Smart Lock (Hinged and Sliding variants) |
| Electronic / Battery | None - passive mechanical handle accessory |
| App / Connectivity | None |
| Brand | Lockton Architectural Hardware (distributed by Sieper Group) |
Frequently Asked Questions
No. The knobs attach to the 8 mm spindle that drives the ELEV36's mechanical clutching mechanism - the same spindle the standard levers use. Swapping handle type has no effect on fingerprint, PIN, RFID, Bluetooth, or key override operation. The lock body electronics are entirely independent of the handle fitted.
This is a common configuration for screen door clearance situations - the outside lever is needed to deadlock the bolt (raise lever), while the inside knob is used to retract the latch for egress. Confirm with your installer that the ELEV36 clutch mechanism operates correctly in a mixed lever-and-knob configuration before ordering a single knob rather than the pair.
Yes - the legacy Lockton specification confirms these knobs are compatible with both the Hinged and Sliding ELEV36 configurations. The ELEV36 Sliding Door uses the same 8 mm spindle interface. Confirm which backset variant you have before ordering if you are unsure - see how to measure your lock backset.
If you are ordering a new ELEV36 and know upfront you want knobs, the ELEV36-BLK-HK and ELEV36-SIL-HK series (Hinged with Knob kits) include the knob handles pre-configured with the mortice lock and cylinder. Ordering a kit is simpler than buying lock and knobs separately. The ELEV36-SLHD-SIL and ELEV36-SLHD-BLK are the standalone replacement pair for post-installation conversions. Speak to Terry's if you need help selecting the right kit for your backset and door type.
No. A round knob requires a gripping and twisting action which is explicitly excluded from AS 1428.1-2009 (Design for Access and Mobility). If your installation must comply with DDA requirements - for example in disability housing (SDA/NDIS), a public building, or a strata-titled property with accessibility obligations - the standard ELEV36 lever handle must be retained. See Chapter 09 - DDA & AS1428.1 compliance for further guidance.
Additional Information
The ELEV36 uses a clutching lever mechanism - meaning the outside handle disengages from the spindle when the lock is in a secured state, preventing forced entry by rotating the handle. This clutching behaviour applies equally to the knob configuration. When the lock is unlocked via any credential (fingerprint, PIN, RFID, key, or app), the spindle engages and rotating the knob retracts the latch and bolt. See Chapter 03 - Access Methods for a full explanation of how clutching handles work in practice.
The ELEV36 is available in Silver (ELEV36-SIL range) and Black (ELEV36-BLK range). These Silver knobs are the correct finish match for any Silver ELEV36 installation. If your lock is Black, order the ELEV36-SLHD-BLK (Black knobs) instead. A mismatched finish on an otherwise clean installation is a common outcome when finish is not confirmed at time of order — check your lock's Art. ID label before ordering.
The ELEV36 family includes a number of accessories: PS-REC-36-SS scar plates (Stainless) and PS-REC-36-BLK (Black) for covering existing door preparation; the SML-H-RBKIT rebate kit for rebated door frames; RFID key fobs for credential management; and the optional G2 WiFi Gateway for remote access via the TTLock platform.
Warranty
Lockton products carry tiered manufacturer warranties — up to 10 years on mechanical locks, 3 years on smart locks and PVD/chrome finishes, and 1 year on electronic door closers, mechanical digital locks, and key accessories. Batteries carry no warranty. Proof of purchase required for all claims. Returns & Warranty | Lockton Warranty Statement
What's in the Box - Lockton ELEV36-SLHD-SIL
- 2 x Silver Turn Knobs (ELEV36-SLHD-SIL) - 58 x 29.6 mm, 8 mm spindle
Lockton Warranty
Lockton Security products are designed and manufactured to high standards of quality, durability, and performance. All Lockton branded products come with guarantees in accordance with the Australian Consumer Law, and additional warranties are offered as detailed below.
Warranty Summary
Warranty periods run from the date of purchase. Proof of purchase is required for all claims.
How to Make a Claim
Lockton products are sold exclusively through trade channels. End-users who have received a Lockton product via an installer or trade supplier should contact their installer in the first instance — the trade supplier will liaise with Lockton Security to process the claim on your behalf.
To lodge a warranty claim through Terry’s Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (including Gold Coast Smart Locks), please follow these steps:
- Contact us with details of the defect and, where possible, installation images.
- Supply your proof of purchase (invoice number or receipt).
- Provide contact details for claim updates.
- A Goods Return Number (GRN) will be obtained from Lockton Security on your behalf.
- Package the product securely, include the GRN, and return it as directed. Products returned without a GRN may not be accepted.
Once a correctly submitted claim is assessed by Lockton Security and approved, they will at their own cost and discretion either: repair and return the product; provide a replacement or similar product; supply refurbished goods of equivalent type and quality (covered under the remaining warranty period); or refund the purchase price. If the claim is not approved, Lockton Security will advise in writing and the product will be returned at the customer’s expense, or recycled upon request.
Exclusions
The Lockton warranty does not cover:
- Damage caused by improper use or incorrect product selection
- Improper installation
- Fair wear and tear
- Environmental conditions outside product specifications (e.g. coastal air, high humidity, or exposure to corrosive substances)
- Products that have been modified, repaired, or altered
- Use of non-genuine replacement parts or accessories
- Batteries (no warranty applies)
Important Notes
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Lockton manufacturer warranty is offered in addition to, and does not limit, these statutory rights.
Further Information
Returns & Warranty — goldcoastsmartlocks.com.au
Lockton Security — Warranty Statement
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
