McGrath Grange Scar Plate 900 x 75 x 2mm - Packet of 2
The McGrath Grange Scar Plate is a flat 900 x 75 x 2mm cover plate supplied as a packet of two. It is designed to cover oversized holes, damage, or legacy fixing cut-outs left by previous door hardware when installing the McGrath Grange Entrance Pull Handle with Smart Lock or the McGrath Grange Dummy Entrance Pull Handle. Its extended 900mm length also makes it well suited to covering the fixing profile left by a Gainsborough Omni handle during a retrofit or replacement installation.
Available in two finishes: Satin Stainless Steel (SS304) and Mild Steel Powder-Coated Matt Black. The 2mm thick plates sit flat against the door or gate stile face, giving a clean, professional finish at the entry point. For shorter stile profiles see the 556 x 64mm version.
Usually same day when ordered before 11am AEST (excluding weekends and QLD public holidays).
Key Features
- Purpose-designed scar plate to suit the McGrath Grange Entrance Pull Handle (smart lock and dummy variants).
- Extended 900mm length also suits Gainsborough Omni handle retrofit installations.
- Covers oversized holes, damage, or legacy fixing cut-outs left by previous hardware.
- Flat 2mm thick profile - sits flush against the door or gate stile face.
- Two mounting holes (top and bottom) for secure fixing.
- Gives a clean, professional-looking finish at the entry point.
- Supplied as a packet of 2 (bulk packed).
- Available in Satin Stainless Steel (SS304) or Mild Steel Powder-Coated Matt Black.
Suitable Uses
- Covering oversized holes, damage, or legacy cut-outs when installing the McGrath Grange pull handle on a door or gate stile.
- Covering the fixing profile left by a Gainsborough Omni handle during a retrofit or replacement.
- Providing a flush, professional finish on aluminium gate stiles, glass door frames and entrance panels where the Grange handle is mounted.
- Installations where the taller 900mm plate is needed — for shorter stile profiles see the 556 x 64mm version.
For a full guide to scar plates see Scar Plates for Smart Locks, including What Is a Scar Plate, When Do You Need One, Why Size Matters and Gates and Aluminium. For pull-handle door retrofit guidance see Smart Locks on Vertical Push-Pull Handle Doors.
Available Finish Options
Satin Stainless Steel
SS304
STK MLGRASP900X75SS
Matt Black
Mild Steel Powder-Coated
STK MLGRASP900X75MBLK
Item Code Family - McGrath Grange Scar Plates & Range
Browse our full range of scar plates and adaptor plates for McGrath, Lockwood, Lockton and other smart lock brands.
View all scar and adaptor plates
Full Specifications
What's In The Box
- 2 x McGrath Grange Scar Plates 900 x 75 x 2mm (bulk packed)
Frequently Asked Questions
It covers oversized holes, damage, or legacy fixing cut-outs left by previous hardware when installing the McGrath Grange pull handle or replacing a Gainsborough Omni handle. See What Is a Scar Plate and When Do You Need One for a full explanation.
Yes — the extended 900mm length is specifically suited to covering the fixing profile left by a Gainsborough Omni handle installation, making it a practical choice for retrofits where the Omni is being replaced with the McGrath Grange. For shorter stile profiles, see the 556 x 64mm version.
Match the finish to your Grange handle. If your Grange is stainless, choose SS304. If it is matt black, choose the mild steel powder-coated variant. The Matt Black powder-coat finish is perfectly fine for coastal and marine environments provided the coating remains intact. If the coating is scratched or chipped during installation or use, the exposed mild steel base will rust — so take care when fitting and touch up any damage promptly. See the materials and finishes section of our scar plate guide.
Two packets. Each packet contains two matching scar plates — one for the internal face and one for the external face of a single leaf. A double door or paired gate has two leaves, so you need one packet per leaf (two packets total). If only one face per leaf needs covering, one packet may suffice for a single leaf — but for a full double door with Grange handles mounted both internally and externally on both leaves, order two packets.
No. These plates carry no fire rating. If you need fire-rated scar plates for a fire door installation, see the fire door scar plates section of our guide.
Additional Information
At 900mm long and 75mm wide, this is the larger of the two Grange scar plate sizes. Its extended length covers the full height of the Grange stile profile and is the correct plate for Gainsborough Omni retrofits. On glazed entrance doors and aluminium gate frames the plate conceals previous hardware cut-outs cleanly and without additional surface work. For shorter stile profiles, the 556 x 64mm version is available.
For guidance on sizing, hole placement, and when a scar plate is and is not needed for pull-handle door retrofits, see the why size matters and brand guide sections, and the five key measurements guide.
Warranty
12-month warranty against defects in materials and workmanship (24-month on ALBION, ASCOT, WINDSOR, ULTRA SECUA, HAMILTON, BARDON and STAFFORD models). McGrath Locks will repair, replace, or refund at their discretion. Proof of purchase required for all claims. Returns & Warranty | McGrath Locks Warranty
What's In The Box - McGrath Grange Scar Plate 900 x 75 x 2mm
- 2 x McGrath Grange Scar Plates 900 x 75 x 2mm (bulk packed)
McGrath Locks Warranty
Warranty Summary
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (the place of purchase) within the applicable warranty period.
- Supply your proof of original purchase — a receipt or tax invoice is required.
- Provide a clear description of the fault and your contact details.
- You may be asked to return the product for assessment before a remedy is determined.
- McGrath Locks will, at their discretion, repair the product, replace it with the same or an equivalent model, or provide a refund of the purchase price.
Exclusions
This warranty does not cover:
- Normal wear and tear
- Products that have been disassembled
- Damage caused by improper handling, incorrect installation, misuse, abuse, neglect, modification, or accident
- Installation by unlicensed persons (including non-licensed locksmiths or technicians)
- Products not used in accordance with the supplied instructions
- Cosmetic damage that does not affect functionality
- Labour or installation costs related to the removal or reinstallation of products
- Exposure to conditions outside normal environmental use
- Work completed before warranty approval
- Damage caused by battery leakage, battery failure, or force majeure
Important Notes
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to your rights and remedies under the Australian Consumer Law.
Further Information
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
