Brava Urban Rebate Kit - Deadbolt, Cylindrical & Tiebolt Latches
The Brava Urban Rebate Kit is a replacement spare part for deadbolt, cylindrical and tiebolt latch configurations, and suits Brava Urban and Brava Metro locksets. It is used when fitting compatible locksets to rebated doors - where the door edge is stepped or angled to meet a rebated frame - or when replacing worn or damaged rebate parts during a service or retrofit.
This is a genuine Brava spare part, supplied separately so locksmiths and builders can source rebate parts without replacing a whole lockset. It comes in three finishes to match existing Brava door hardware, and sits alongside the other kits in our rebate kits and strikes range.
Key Features
- Genuine Brava spare part rebate kit.
- Suits deadbolt, cylindrical and tiebolt latch configurations.
- Compatible with Brava Urban and Brava Metro lockset ranges, as listed in the Brava Urban catalogue.
- For use on rebated door installations where the door edge meets a stepped or angled frame.
- Available in Matt Black, Polished Brass and Satin Nickel to match existing Brava door hardware.
- Allows rebate parts to be replaced independently, without replacing the full lockset.
What's in the Box
- 1 x Brava Urban rebate kit
Brava catalogues its Urban deadbolt rebate strike as a separate item - see catalogue page 44.
Suitable Uses
- Rebated timber or aluminium door installations using Brava Urban or Metro locksets.
- Replacement of worn, damaged or missing rebate parts during a service call.
- Lock retrofits where an existing door has been modified from flush to rebated configuration.
- New installations on rebated frames requiring a finish-matched rebate kit - check your existing door hardware first.
Available Finish Options
Matt Black
BREE034MB
Polished Brass
BREE034PB
Satin Nickel
BREE034SS
Finish selection does not affect functionality, compliance, or performance.
Specifications
Frequently Asked Questions
What is a rebate kit and when is one needed?
A rebate kit adapts a standard latch or deadbolt for use on a rebated door - one where the door edge has a stepped profile to meet a rebated frame. Without a rebate kit, the latch faceplate will not seat flush and the door will not close correctly. If your door has a rebated frame (common on double doors and some timber entrance sets), a rebate kit is required at the time of installation. Not sure what you have? Our guide to identifying existing door hardware walks through the common setups.
A rebate kit adapts a standard latch or deadbolt for use on a rebated door - one where the door edge has a stepped profile to meet a rebated frame. Without a rebate kit, the latch faceplate will not seat flush and the door will not close correctly. If your door has a rebated frame (common on double doors and some timber entrance sets), a rebate kit is required at the time of installation. Not sure what you have? Our guide to identifying existing door hardware walks through the common setups.
Which Brava locks does this rebate kit suit?
It suits the Brava Urban and Brava Metro ranges with deadbolt, cylindrical and tiebolt latch configurations - Brava lists it under "Rebate kits suit Metro and Urban" in its Urban catalogue. It is not confirmed for other Brava series. If you are unsure whether it suits your lockset, check the product code on your existing hardware or contact us before ordering.
It suits the Brava Urban and Brava Metro ranges with deadbolt, cylindrical and tiebolt latch configurations - Brava lists it under "Rebate kits suit Metro and Urban" in its Urban catalogue. It is not confirmed for other Brava series. If you are unsure whether it suits your lockset, check the product code on your existing hardware or contact us before ordering.
Will this kit fit another brand's lock?
No - rebate kits are made to suit their own brand's latch and faceplate. For other brands, choose the matching kit: the Lockwood 530 Series rebate kit, the Lockton E-Series rebate kit, the McGrath 60/50 mortice rebate kit or the Vault rebate kit. Every kit we stock is in our rebate kits and strikes range.
No - rebate kits are made to suit their own brand's latch and faceplate. For other brands, choose the matching kit: the Lockwood 530 Series rebate kit, the Lockton E-Series rebate kit, the McGrath 60/50 mortice rebate kit or the Vault rebate kit. Every kit we stock is in our rebate kits and strikes range.
What is the difference between a deadbolt, cylindrical and tiebolt latch - and which does my door use?
A deadbolt is a bolt thrown by a key or thumbturn with no spring return - it locks in position (see how a deadbolt works). A cylindrical latch is a spring-loaded angled bolt operated by a lever handle, providing a hold-closed latching function (see how a latch works and latch vs bolt). A tiebolt latch is the latch Brava fits to its Urban tiebolt locksets, offered in deadlatching entrance and storeroom versions and a non-deadlatching passage version. The marking on your existing latch faceplate or your hardware documentation will confirm which type is fitted. If you are unsure, Terry's can identify the latch type during a service call.
A deadbolt is a bolt thrown by a key or thumbturn with no spring return - it locks in position (see how a deadbolt works). A cylindrical latch is a spring-loaded angled bolt operated by a lever handle, providing a hold-closed latching function (see how a latch works and latch vs bolt). A tiebolt latch is the latch Brava fits to its Urban tiebolt locksets, offered in deadlatching entrance and storeroom versions and a non-deadlatching passage version. The marking on your existing latch faceplate or your hardware documentation will confirm which type is fitted. If you are unsure, Terry's can identify the latch type during a service call.
Can this rebate kit be fitted by a DIYer, or does it require a locksmith?
Fitting a rebate kit changes how the latch seats in the door edge and may require chiselling or adjustment of the door rebate. A competent tradesperson or experienced DIYer can fit this kit, but a licensed locksmith is recommended where the door frame has not previously been prepared for a rebated latch, or where the existing hardware is being serviced under warranty. We can help through our advice and installation service or an on-site installation.
Fitting a rebate kit changes how the latch seats in the door edge and may require chiselling or adjustment of the door rebate. A competent tradesperson or experienced DIYer can fit this kit, but a licensed locksmith is recommended where the door frame has not previously been prepared for a rebated latch, or where the existing hardware is being serviced under warranty. We can help through our advice and installation service or an on-site installation.
Additional Information
Confirm your latch type and range before ordering.
Rebate kits are latch-specific. Ordering the wrong type - for example, a cylindrical rebate kit for a deadbolt application - will result in a fitment that does not work correctly. Check the existing latch faceplate marking or the original installation documentation before placing your order, and see bored cylindrical vs mortice door prep if you are unsure how your door was prepared. If in doubt, Terry's can assist with identification.
Rebate kits are latch-specific. Ordering the wrong type - for example, a cylindrical rebate kit for a deadbolt application - will result in a fitment that does not work correctly. Check the existing latch faceplate marking or the original installation documentation before placing your order, and see bored cylindrical vs mortice door prep if you are unsure how your door was prepared. If in doubt, Terry's can assist with identification.
Rebate kits are required for rebated doors - not all doors need one.
A rebate kit is only required where the door edge has a stepped rebate profile. Flush (non-rebated) doors do not need a rebate kit. Fitting a rebate kit to a non-rebated door will result in incorrect latch projection and may prevent the door from latching correctly.
A rebate kit is only required where the door edge has a stepped rebate profile. Flush (non-rebated) doors do not need a rebate kit. Fitting a rebate kit to a non-rebated door will result in incorrect latch projection and may prevent the door from latching correctly.
The Urban deadbolt rebate strike is a separate part.
Brava catalogues a separate Urban deadbolt strike designed to suit its rebate kits, in its own finish range. Check the frame side of the door as well as the door edge when planning a rebated installation - our rebate kits and strikes range covers both.
Brava catalogues a separate Urban deadbolt strike designed to suit its rebate kits, in its own finish range. Check the frame side of the door as well as the door edge when planning a rebated installation - our rebate kits and strikes range covers both.
Warranty
Warranty
Brava products are backed by Australian Consumer Law guarantees covering defects in materials and workmanship. Proof of purchase required for all claims. Returns & Warranty
Brava products are backed by Australian Consumer Law guarantees covering defects in materials and workmanship. Proof of purchase required for all claims. Returns & Warranty
Download PDF Resources
Brava Urban Catalogue 2024 (PDF)
The Brava Urban section of the Brava catalogue - deadbolts, mortice lock, rim and euro cylinders, strike plates, latches and spare parts. The rebate kits and their finish codes are on catalogue page 44.
The Brava Urban section of the Brava catalogue - deadbolts, mortice lock, rim and euro cylinders, strike plates, latches and spare parts. The rebate kits and their finish codes are on catalogue page 44.
PDF Files - Brava Urban Rebate Kit (BREE034)
Brava Urban Catalogue 2024 (PDF)
The Brava Urban section of the Brava catalogue - deadbolts, mortice lock, rim and euro cylinders, strike plates, latches and spare parts. The rebate kits and their finish codes are on catalogue page 44.
The Brava Urban section of the Brava catalogue - deadbolts, mortice lock, rim and euro cylinders, strike plates, latches and spare parts. The rebate kits and their finish codes are on catalogue page 44.
Brava Warranty
Warranty Summary
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries first. All warranty claims must be initiated through us - contact Gold Coast Smart Locks via our Returns & Warranty page with your order details and a description of the fault.
- Have your proof of purchase ready. Your original invoice or receipt is required to support any warranty or consumer guarantee claim.
- Describe the fault clearly. Include the product name, model or SKU if known, when the fault was first noticed, and how the product was being used at the time.
- We will assess and progress your claim. Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries will liaise with LSC on your behalf to arrange repair, replacement, or refund as appropriate under the circumstances and applicable law.
Important Notes
Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. These rights apply regardless of any additional warranty terms offered by the manufacturer or distributor.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. These rights apply regardless of any additional warranty terms offered by the manufacturer or distributor.
General warranty exclusions.
Warranty coverage does not extend to damage caused by improper installation, misuse, accidental damage, unauthorised modification, or normal wear and tear. Products must be installed and used in accordance with the manufacturer's documentation and relevant Australian standards.
Warranty coverage does not extend to damage caused by improper installation, misuse, accidental damage, unauthorised modification, or normal wear and tear. Products must be installed and used in accordance with the manufacturer's documentation and relevant Australian standards.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
