Skip to main content

Lockwood Induro 4-Point Hinged Door Mortice Locks - LW7230L

Lockwood

Terry's Online Price $198.73
(No reviews yet) Write a Review
SKU:
STK LW7230L
UPC:
9340116138473
Availability:
Usually ships in 3 business days
Back-Set:
30mm
Back-Set:
Short
Colour/Finish:
Silver
Adding to cart… The item has been added
Lockwood Logo

Lockwood Induro 4-Point Hinged Door Mortice Lock - 30mm Backset, Long Throw (LW7230L)

The Lockwood Induro 4-Point Hinged Door Mortice Lock (LW7230L) is a lift-to-lock multipoint mortice lock for hinged residential aluminium and large panel doors, with a 30mm backset and a 23mm long throw deadbolt. Lifting the handle throws a lift-bolt that pulls the door against its seal, and with shoot bolt rods fitted it also throws bolts into the head and sill for four points of locking.

This is the lock body on its own - the shoot bolt rods kit is not included. Add the rods kit from Accessories and Spares for four-point locking.

The strike plate, Euro cylinder and lever furniture are ordered separately. It is a retrofit replacement for Optimum, LCL and Millton locks on the same door-side installation, although the strike and jamb cut-outs may differ because of the lift-bolt.

Dispatch
Estimated Dispatch
Usually ships in 3 business days.
Lock Body Only - Strike, Cylinder and Furniture Sold Separately
No strike plate, Euro cylinder, lever furniture or shoot bolt rods are in the pack. Choose a strike to suit your frame from Accessories and Spares below, add the rods kit for four-point locking, a 5 or 6 pin fixed cam Euro profile cylinder, and lever-on-long-plate furniture such as Palladium. Not sure what your door needs? Contact us with photos of the door and frame.

Key Features

  • Four points of locking with shoot bolts fitted: latch, lift-bolt, and top and bottom shoot bolts - rods kit sold separately
  • Lift the handle to lock; handle down retracts every locking point in one movement
  • The lift-bolt compresses the door against its seal - with the correct strike that means better water and air sealing, especially on large panel doors
  • Locking points can be thrown in any order, with or without the shoot bolts
  • Works as a single-point latch for everyday coming and going
  • 23mm long throw deadbolt projection - why bolt throw matters
  • Reversible latch, so handing is set on site
  • Stainless steel faceplate over a durable mechanism; takes a 7.6mm or 8mm spindle
  • Latch can be deadlocked by key
  • Retrofit replacement for Optimum, LCL and Millton locks on the same door-side installation
  • Tested to AS 4145.2-2008
  • Suits doors 32mm to 45mm thick
  • Browse more mortice locks

What's in the Box

  • 1 x Induro 4-Point mortice lock body with brushed stainless steel faceplate, 30mm backset, 23mm long throw

Not in the pack: strike plate, Euro cylinder, shoot bolt rods and lever furniture.

Suitable Uses

Available Finish Options

  • Brushed Stainless Steel
    Brushed Stainless Steel
    (This Product)
    LW7230L

The finish is the faceplate on the door edge. Finish selection does not affect functionality, compliance, or performance.

Item Code Family - Lockwood Induro Hinged Door Mortice Locks

Eight Induro listings, split by locking points, backset, bolt throw and whether the rods kit is in the pack.

ImageItemItem CodeBacksetBolt ThrowPack
Lockwood Induro 2-Point Mortice Lock LW7130LLockwood Induro 2-Point Mortice LockLW7130L30mm24mm long or 13mm short (set on the lock)Lock body
Lockwood Induro 2-Point Mortice Lock LW7140LLockwood Induro 2-Point Mortice LockLW7140L40mm24mm long or 13mm short (set on the lock)Lock body
Lockwood Induro 2-Point Mortice Lock LW7150LLockwood Induro 2-Point Mortice LockLW7150L50mm24mm long or 13mm short (set on the lock)Lock body
Lockwood Induro 4-Point Mortice Lock LW7230SLockwood Induro 4-Point Mortice LockLW7230S30mm13mm short throwLock body - rods kit sold separately
Lockwood Induro 4-Point Mortice Lock LW7230LLockwood Induro 4-Point Mortice LockLW7230L30mm23mm long throwLock body - rods kit sold separately - this product
Lockwood Induro 4-Point Mortice Lock LW7240SLockwood Induro 4-Point Mortice LockLW7240S40mm13mm short throwLock body - rods kit sold separately
Lockwood Induro 4-Point Mortice Lock with Rods Kit LW7230S/A10Lockwood Induro 4-Point Mortice Lock with Rods KitLW7230S/A1030mm13mm short throwLock body with shoot bolt rods kit
Lockwood Induro 4-Point Mortice Lock with Rods Kit LW7240S/A10Lockwood Induro 4-Point Mortice Lock with Rods KitLW7240S/A1040mm13mm short throwLock body with shoot bolt rods kit
Not a Replacement Mortice for the Latitude Slim Smart Lock
The Lockwood Latitude Slim Smart Lock is built on the same Induro 4-Point lift-to-lock system, but it is supplied with its own mortice - an Induro body adapted for the keyless escutcheon. This keyed lock is not a replacement mortice for a Latitude Slim. If you need one, contact us with the item code from your lock. Choosing between keyed and keyless? The matching Latitude Slim for a 30mm backset and long throw is LWL/LSSL/0431B - see the Latitude Slim configurations.

Accessories & Spares

Strike plates are not in the lock pack, so every installation needs one of the strikes below. These parts are sold on our Gold Coast Hardware website: each link opens there in a new tab, and they are ordered there in a separate cart. Contact us to confirm the right strike for your frame.

ImageItemPart NumberWhat it is and when you need it
Lockwood Induro Double Sided Strike - 12mmLockwood Induro Double Sided Strike - 12mmINDU004SSStainless steel strike plate made for Induro hinged door mortice locks, with a 12mm lip. Reversible, so it suits either hand.
Lockwood Optimum Double Sided StrikesLockwood Optimum Double Sided StrikesOPS001SS / OPS002SS / OPS003SSStandard and extended lip hinged door strikes from the Induro and Optimum accessory range: 12mm, 43mm and 60mm lip. Reversible for either hand.
Lockwood Timber Door Strike KitLockwood Timber Door Strike KitP3352CDLSS (left hand) / P3352CDRSS (right hand)Strike and strike box kit for timber doors. Handed - order left or right.
Lockwood Timber Door Rebate Strike KitLockwood Timber Door Rebate Strike KitP3352TFLSS (left hand) / P3352TFRSS (right hand)Strike and strike box kit for rebated timber doors. Handed - order left or right.
Lockwood Aluminium French Door Strike KitLockwood Aluminium French Door Strike KitP3352AFLSS (left hand) / P3352AFRSS (right hand)Strike and strike box kit for aluminium French doors. Handed - order left or right.
Lockwood Shoot Bolt Rods KitLockwood Shoot Bolt Rods KitP33096The rods that turn this lock body into a four-point lock: 1m and 1.3m rods, rod ends and tips. Special order and non-returnable.
Lockwood Multipoint Extension KitLockwood Multipoint Extension KitP84017Extends the shoot bolt rods on doors over 2.4m high.

The lock also needs a 5 or 6 pin fixed cam Euro profile cylinder and lever-on-long-plate furniture, including Palladium and Palladium Xtra Snib. Contact us and we will match both to the lock.

Full Specifications

AttributeDetail
Product TypeEuro profile mortice lock for hinged doors - 4-Point lift-to-lock (latch, lift-bolt, top and bottom shoot bolts)
Item CodeLW7230L
Backset30mm
Bolt ThrowLong throw - 23mm deadbolt projection
LatchReversible - handing set on site; can be deadlocked by key
Spindle7.6mm or 8mm
Cylinder5 or 6 pin fixed cam Euro profile - ordered separately
FurnitureLever on long plate, including Palladium and Palladium Xtra Snib (Xtra Snib needed for the snib-lock function) - ordered separately
StrikeNot included - ordered separately
Shoot Bolt RodsNot included - rods kit P33096 ordered separately
Door Thickness32mm to 45mm
Door TypeHinged residential aluminium and large panel doors
FaceplateBrushed stainless steel
Lock StatusPassage, Safety and Secure modes
StandardAS 4145.2-2008
ReplacesOptimum, LCL and Millton locks
Warranty25 years mechanical

Lock Status and Operation

  • Single point - latch. Works like an ordinary passage door: handle down retracts the latch, and the door latches itself as it closes.
  • Four point - lift to lock. Lift the handle to throw the lift-bolt and the shoot bolts. Push the handle down and every locking point retracts together. Turn the key to deadlock.
Induro 4-Point operation - handle up throws the top and bottom shoot bolts, handle down retracts the shoot bolts and deadbolt, turn the key to deadlock
Handle up throws the shoot bolts; handle down retracts the shoot bolts and deadbolt; turn the key to deadlock

With the right furniture the lock has three status modes:

  • Passage mode - free access from inside and outside, no key needed.
  • Safety mode - switched on and off with the snib lever from inside; a key is needed to unlock from outside. This mode needs Palladium Xtra Snib furniture.
  • Secure mode - the handles are locked from both sides, and a key is needed from either side.

Dimensions

Lockwood Induro 4-Point mortice lock dimensional drawing - 210mm overall, 180mm case, 85mm centres, 24mm forend
Dimensional drawing of the Induro 4-Point: 210mm overall, 180mm case, 85mm spindle to cylinder centre, 24mm forend width, 12mm latch projection and 13mm short throw deadbolt projection. Available in 30mm and 40mm backsets. This long throw model projects 23mm.
DimensionMeasurement
Overall length210mm
Case180mm
Forend width24mm
Spindle to cylinder centre85mm
Backset30mm
Latch projection12mm
Deadbolt projection23mm
Door thickness32mm to 45mm

Frequently Asked Questions

What else do I need to make this a working lock?
This listing is the lock body. You also need a strike plate, a Euro cylinder and lever furniture, plus the shoot bolt rods kit for four-point locking. The strikes and rods are listed under Accessories and Spares above; contact us and we will match a cylinder and furniture to the lock.
Does it lock without the shoot bolts?
Yes. The locking points can be thrown in any order, so the lock works with or without shoot bolts thrown, and in everyday use it behaves as a single-point latch. Shoot bolts need the rods kit - sold separately as P33096, or order the rods-kit version of this lock.
Will it replace an Optimum, LCL or Millton lock?
Yes, on the same door-side installation. Allow for the frame side: because this lock uses a lift-bolt, the strike and the jamb cut-outs may differ from the lock it replaces.
Is this the short throw or the long throw?
This is the 23mm long throw model. The 30mm backset comes in short throw (13mm) and long throw (23mm); the 40mm backset is short throw only. Read why bolt throw matters.
Which backset do I need?
Measure from the door edge to the centre of the spindle - how to measure your backset. This lock is 30mm; the Induro 4-Point also comes in 40mm.

Additional Information

Pick the strike before you order. Strike plates are not in the lock pack, and the strike decides how firmly the door pulls up against its seal. Choose one to suit your frame from Accessories and Spares.
Want the snib? Safety mode works from a snib lever on the inside furniture. Palladium Xtra Snib is the furniture that has it.
Handing is set on site. The latch is reversible, so one lock suits left and right hand doors. If you are ordering a handed strike kit, work out your door handing first.
Send us photos if you are unsure. A photo of the door edge, the frame and the lock on the door now is usually enough for us to confirm the backset and strike. See where to send your photos, or book a site survey.
Near the coast. The faceplate is stainless steel, but the Lockwood warranty excludes corrosion from coastal or corrosive environments.

Warranty

Warranty
Lockwood Warranty (Australia)
Lockwood products bought new in Australia through authorised channels are covered against defects in materials and workmanship: 25 years on mechanical components, 3 years on electrical and electronic parts (PADDE and electric mortice locks 5 years; batteries excluded), 12 months on keys, and finish cover that varies by finish type (up to 25 years on Everbrass). Proof of purchase required for all claims.
Excludes normal wear, misuse, improper installation or maintenance, unauthorised modification, and corrosion from coastal or corrosive environments.
This warranty operates in addition to your rights under the Australian Consumer Law.

Download PDF Resources

Lockwood Euro Profile Mortice and Twin Bolt Locks Catalogue (PDF)
The 24-page catalogue. The Induro 4-Point is on pages 5 and 6, the strikes and strike kits on pages 13 and 14, and the shoot bolt rods on page 16.
Lockwood 25 Year Mechanical Warranty (PDF)
Warranty terms and conditions for Lockwood products, including the 25-year cover on mechanical components.
Lockwood Logo

Lockwood Induro 4-Point LW7230L - FAQ and Fitting Guide

Sizing, operation and fitting questions for the Lockwood Induro 4-Point Hinged Door Mortice Lock (item code LW7230L). For smart lock questions see Chapter 13 - Smart Lock FAQ, and for the full range read the Ultimate Smart Lock Buyer's Guide.

Fit and Sizing

How do I check the backset?
Measure from the door edge to the centre of the spindle hole - step by step here. This lock is 30mm. Getting it wrong means the handle and cylinder holes will not line up: what happens with the wrong backset.
What door thickness does it suit?
Doors 32mm to 45mm thick. Here is how to measure door thickness.
Is it handed?
No. The latch is reversible, so handing is set on site. The strike and strike box kits are handed, so check which hand your door is before ordering one.
Will it fit where an Optimum, LCL or Millton lock is now?
On the door side, yes - the installation is the same. On the frame side the strike and jamb cut-outs may differ, because this lock uses a lift-bolt where the older locks used a projection bolt. If you are not sure what is on the door, identify your existing hardware first.

Locking and Operation

How does lift-to-lock work?
Lift the handle and the lift-bolt throws into the strike, pulling the door against its seal; with rods fitted the top and bottom shoot bolts throw at the same time. Push the handle down and every locking point retracts together. Turn the key to deadlock.
What is it like in everyday use?
Like an ordinary passage door. Handle down retracts the latch, and the door latches itself when it closes. You only lift the handle when you want the extra locking points.
What is the deadbolt projection?
23mm on this model. Across the range, short throw is 13mm (30mm and 40mm backsets) and long throw is 23mm (30mm backset only). More on deadbolt projection.
What are Passage, Safety and Secure modes?
Passage gives free access from both sides. Safety is switched with the snib lever inside and needs a key from outside. Secure locks the handles from both sides and needs a key from either side. Safety mode needs Palladium Xtra Snib furniture.

What Else You Need

Does it come with a strike?
No. Choose from the Induro 12mm strike, the Optimum 12mm, 43mm and 60mm strikes, or a handed strike and strike box kit for a timber door, a rebated timber door or an aluminium French door. They are shown on page 13 of the catalogue.
Which cylinder does it take?
A 5 pin or 6 pin fixed cam Euro profile cylinder, ordered separately. Contact us and we will match one to the lock.
Which handles fit?
Lever-on-long-plate furniture, including Palladium and Palladium Xtra Snib. The lock takes a 7.6mm or 8mm spindle.
Do I need the rods kit?
Only for four-point locking. This listing is the lock body, so add the kit or order the rods-kit version. The shoot bolt rods kit P33096 holds 1m and 1.3m rods, rod ends and tips, and the extension kit P84017 covers doors over 2.4m - see page 16 of the catalogue.

Going Keyless

Is this the mortice inside the Lockwood Latitude Slim?
No. The Latitude Slim uses the Induro 4-Point lift-to-lock system, but its mortice is an Induro body adapted for the keyless escutcheon and comes in the carton with the lock. This keyed lock is not a spare for it. See how its multipoint locking works on that page.
What other keyless options suit an aluminium door?
Browse our smart locks for doors with a narrow frame.

Standards and Warranty

What standard is it tested to?
AS 4145.2-2008. Read what AS 4145.2 covers.
What is the warranty?
25 years on mechanical components under the Lockwood warranty, with the terms in the Lockwood 25 Year Mechanical Warranty (PDF).
Does the warranty cover corrosion near the coast?
No. Corrosion from coastal or corrosive environments is excluded, so keep the faceplate clean if you live near salt water.

Related Products, Guides and Buyer's Guide Chapters

Induro mortice locks: 2-Point LW7130L | 2-Point LW7140L | 2-Point LW7150L | 4-Point LW7230S | 4-Point LW7240S | 4-Point LW7230S/A10 | 4-Point LW7240S/A10.

Keyless on the same system: Lockwood Latitude Slim Smart Lock | Latitude Slim item codes | mortice locks for smart locks.

Strikes and rods: Lockwood Induro Double Sided Strike - 12mm | Lockwood Optimum Double Sided Strikes | Lockwood Timber Door Strike Kit | Lockwood Timber Door Rebate Strike Kit | Lockwood Aluminium French Door Strike Kit | Lockwood Shoot Bolt Rods Kit | Lockwood Multipoint Extension Kit.

Guides: standard backset sizes | choosing bolt throw | door handing | Chapter 02 - door prep | Chapter 01 - the mechanical layer | Lockwood brand profile.

Lockwood Logo

Lockwood Induro 4-Point Mortice Lock - Dimensions

Lockwood Induro 4-Point mortice lock dimensional drawing - 210mm overall, 180mm case, 85mm centres, 24mm forend
Dimensional drawing of the Induro 4-Point: 210mm overall, 180mm case, 85mm spindle to cylinder centre, 24mm forend width, 12mm latch projection and 13mm short throw deadbolt projection. Available in 30mm and 40mm backsets. This long throw model projects 23mm.
Lockwood Logo

Lockwood Induro 4-Point Mortice Lock - Catalogue Pages

Lockwood Euro Profile Mortice and Twin Bolt Locks Catalogue - page 5 - induro 4-point overview and features
Page 5 - Induro 4-Point overview and features
Lockwood Euro Profile Mortice and Twin Bolt Locks Catalogue - page 6 - induro 4-point dimensions, operation and part numbers
Page 6 - Induro 4-Point dimensions, operation and part numbers
Lockwood Euro Profile Mortice and Twin Bolt Locks Catalogue - page 13 - hinged door strikes and strike kits
Page 13 - hinged door strikes and strike kits
Lockwood Euro Profile Mortice and Twin Bolt Locks Catalogue - page 14 - aluminium french door kit and sliding door strikes
Page 14 - aluminium French door kit and sliding door strikes
Lockwood Euro Profile Mortice and Twin Bolt Locks Catalogue - page 16 - shoot bolt rods and extension kit
Page 16 - shoot bolt rods and extension kit
Lockwood Logo

PDF Files - Lockwood Induro LW7230L

Lockwood Euro Profile Mortice and Twin Bolt Locks Catalogue (PDF)
The 24-page catalogue. The Induro 4-Point is on pages 5 and 6, the strikes and strike kits on pages 13 and 14, and the shoot bolt rods on page 16.
Lockwood 25 Year Mechanical Warranty (PDF)
Warranty terms and conditions for Lockwood products, including the 25-year cover on mechanical components.
Lockwood Logo

Lockwood Warranty

Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.

The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.

Warranty Summary

Coverage AreaWarranty PeriodNotes
Mechanical components25 yearsDefects in material and workmanship under normal use.
Electrical and electronic components3 yearsBatteries excluded.
PADDE series and electric mortice locks5 yearsSpecific to those product groups.
Keys12 monthsManufacturing defects only.
FinishesVaries by finish typeSee the finish coverage guide below.

Finish Coverage Guide

  • Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
  • Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
  • PVD and VIVID finishes: typically up to 10 years.
  • Symmetry range finishes: typically up to 5 years.
  • Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
  • Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
  • Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.

How to Make a Claim

For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
  1. Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
  2. Keep the product securely packed and clearly identified, ready for assessment.
  3. Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
  4. ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.

Exclusions

  • Normal wear and tear.
  • Misuse, abuse, accidental damage or use outside published specifications.
  • Improper maintenance or failure to follow care instructions.
  • Unauthorised modification, repair or use of non-genuine parts.
  • Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
  • Removal, refitment or associated labour charges.
  • Products not originally sold in Australia through authorised channels.
Australian Consumer Law
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
Ask our expert locksmith - 30 years experience

Confused? Overwhelmed? We get it.

Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.

Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.

Get Your Free Recommendation →

How it works - three easy steps:

1. Upload photos

A few clear shots of your door, lock and frame - inside and out.

2. We assess

Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.

3. You get a recommendation

A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.

Also useful while you are deciding: