HID iCLASS Contactless Tag with Adhesive Back - Black
The HID iCLASS Contactless Tag (2060CKSNN) is a coin-sized 13.56 MHz iCLASS credential from HID with an adhesive back. Stick it to a non-metallic card or device and that item works as an iCLASS credential on readers such as the HID iCLASS SE R15 reader and HID Signo readers - see Compatible Readers. Do not stick it to metal - metal shields the tag and stops it working.
Each tag is programmed to your site before dispatch - your card format, facility code and numbers - and programming is included in the price. We collect those details on an order form after you order, so have them ready. This is a special order item.
These tags are programmed to suit your access control system before they are sent, and programming is included in the price. After your order is placed, you will be asked to complete a separate order form with your site's details, and we cannot send your tags until we have it. To avoid delays, have the following ready:
- Card format - 26-bit (H10301) is the most common; tell us if your site uses another format
- Facility / Site Code - the facility or site code your panel is set up for
- Start Number and End Number - the number range you need, chosen so it does not clash with credentials already in use
- Offset (if any)
- ICE / Elite Key (if any) - only where your site runs its own HID Elite key
- Order quantity and a site reference (if applicable)
This tag is ordered in and programmed for you - contact us for an estimated dispatch time before you order.
Key Features
- Coin-sized disc - 32.6 mm across, 1.8 mm thick and about 1.2 g.
- Adhesive back - it attaches to non-metallic cards and devices, so an existing plastic ID badge or contact smart card works as a contactless credential. HID describes it as a transition device while a site re-badges.
- iCLASS 13.56 MHz smart technology - a read/write contactless credential with 2k bit (256 byte) memory in two application areas.
- Secure by design - iCLASS uses mutual authentication, encrypted data transfer and 64-bit diversified keys between the credential and the reader.
- No battery - a passive design that HID estimates is good for at least 100,000 reads.
- Lexan shell, working from -40 to +70 deg C.
- Programmed for your site - each tag is programmed with the format, facility code and number your panel expects, at no extra charge. The number is programmed in, not printed on the tag. See Programming Details.
- Lifetime warranty from HID.
Compatible Readers
The iCLASS Tag works with HID readers that read iCLASS. From our range that is the HID iCLASS SE R15 reader, and HID Signo readers ordered in Smart Profile or Standard Profile.
Read range depends on the reader as much as the credential. These are HID's typical figures, and they vary with installation conditions, including a metal mounting surface. HID gives the R15 figures for credentials that carry its Secure Identity Object (SIO). HID Signo readers read iCLASS and iCLASS SE in their Smart and Standard profiles - the Seos Profile does not. Whatever the reader, the door opens only when the credential's format, facility code and number are ones your access control panel knows. The R15 figures are on page 2 of HID's iCLASS SE readers datasheet (PDF), and the Signo figure is on page 2 of its Signo datasheet (PDF). HID's tag datasheet gives up to 2.5 cm on its earlier readers, so hold the tag right at the reader.
What's in the Box
- 1 x HID iCLASS contactless tag (2060CKSNN) with adhesive backing, programmed to your site's details
Suitable Uses
- Adding iCLASS access to an existing plastic ID badge or contact smart card while a site re-badges.
- Sites moving to iCLASS from Wiegand, magnetic stripe or barium ferrite cards.
- A non-metallic item a user already carries, where a card or fob would be one thing too many.
- Sites running HID iCLASS or Signo readers that need more tags, or replacements.
Metal surfaces - metal shields the tag and stops it working. Cards that go into full insertion or tractor feed readers. Readers that do not read iCLASS - 125 kHz proximity readers, and HID Signo readers in Seos Profile. The HID iCLASS SE RKLB40 biometric reader - it does not read 2k bit iCLASS credentials.
Available Finish Options
Black
(This Product)
STK 2060CKSNN
Finish selection does not affect functionality, compliance, or performance.
HID iCLASS Credentials
We list eight HID iCLASS and iCLASS SE credentials on four listings - five cards, two key fobs and an adhesive tag.
The bold row is this product. All eight are 13.56 MHz HID credentials with 2k bit (256 byte) memory. The iCLASS SE ones also carry HID's Secure Identity Object (SIO) - match iCLASS or iCLASS SE to what your site's readers and existing credentials use. The Compatible Readers table lists the readers.
Full Specifications
Dimensions
HID gives the tag as 1.285 inches across and 0.070 inches thick. The figures are on page 2 of the iCLASS Tag datasheet (PDF).
Frequently Asked Questions
No. Metal shields the tag and stops it working. Stick it to a non-metallic card or device, and keep it off cards that go into full insertion or tractor feed readers.
HID readers that read iCLASS. From our range that is the HID iCLASS SE R15 reader and HID Signo readers in Smart Profile or Standard Profile. The Compatible Readers table lists them with the read range on each.
Very close. HID's iCLASS Tag datasheet gives up to 2.5 cm on its earlier R10, R30 and R40 readers, and its iCLASS SE readers datasheet gives 4 cm for an iCLASS tag or fob on the R15. Expect to hold the tag right at the reader.
Your card format, your facility or site code, the start and end numbers you want, any offset, your ICE or Elite key if your site has one, and how many you need. We send a separate order form for these after you order - the Programming Details note above lists them. Your installer or system administrator can usually supply them.
Yes, if your readers read HID iCLASS and we program the tags in the format your panel is set up for. Send us a photo of an existing credential and any numbers printed on it if you are not sure what your site uses.
Additional Information
- Card format matters. A new card, fob or tag only works once its format, facility code and number range match what your panel expects. Have those details ready when you order credentials. HID's datasheets say any existing HID format can be programmed into an iCLASS credential.
- Choose your number range with care. HID's open 26-bit format has 255 facility codes with 65,535 card numbers in each, and HID does not track who orders which numbers, so a duplicate is possible. Start a new batch above the highest number already in use on your site.
- Test before you roll out. Cards and readers vary, and HID does not claim the tag will work in every situation. Confirm it works on your readers and on the item you plan to stick it to before you order in quantity - contact us.
- Elite and Corporate 1000 sites. If your site runs its own HID Elite key or is on HID's Corporate 1000 program, tell us before you order so the tags can be matched to it.
- Allow for lead time. This is a special order item and it is programmed for your site, so contact us for an estimated dispatch time before you order.
Warranty
HID readers and credentials bought new through authorised channels are covered by HID Global's warranty against defects in materials and workmanship: lifetime cover on HID Signo, iCLASS SE and HID Proximity readers and on HID-branded Seos, iCLASS, Proximity, MIFARE DESFire and UHF cards, fobs and tags, and 2 years on iCLASS SE reader accessories. Proof of purchase required for all claims.
Download PDF Resources
Two-page datasheet - what the tag is for on page 1, and on page 2 the specification table with its size, weight, memory, operating temperature and typical maximum read range on HID's earlier iCLASS readers.
PDF Files - HID iCLASS Contactless Tag
Two-page datasheet - what the tag is for on page 1, and on page 2 the specification table with its size, weight, memory, operating temperature and typical maximum read range on HID's earlier iCLASS readers.
HID's datasheet for its iCLASS SE readers - page 2 has the typical read range of iCLASS cards, tags and fobs on the R15.
HID's datasheet for the Signo reader range - page 2 lists the credentials the readers take and the typical read range for cards.
HID Warranty
HID branded readers, credentials and accessories are covered by warranties issued by HID Global Corporation and its affiliated entities (part of ASSA ABLOY), distributed in Australia by LSC. Most HID readers and HID-branded credentials carry lifetime cover; a small number of specific models and accessories carry a fixed term instead.
The summary below sets out HID's published warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official HID Global Warranty Policy linked at the base of this page.
Warranty Summary
Understanding "Lifetime" Cover
HID's published policy uses the term "Lifetime Warranty Period" without defining it further - it is not stated as a fixed number of years, "for the life of the product", or "as long as you own it". It applies for as long as HID continues to honour that stated period under its published policy.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase and a description of the fault.
- Where a claim needs to be escalated, HID requires written notice from the end customer within the applicable warranty period - we handle this notification on your behalf.
- HID's remedy, at its own option, is to repair the product, replace it, or issue a credit towards a future purchase.
- Postage, insurance and shipping costs to present hardware for warranty assessment are the end customer's responsibility under HID's policy - we'll advise what's needed before anything is sent.
Exclusions
This warranty does not cover, and will be voided by, any of the following:
- Installation by anyone other than HID or an HID-authorised installer
- Use other than as authorised in HID's own documentation
- Modification, alteration or repair by a party other than HID
- Combination with hardware, operating systems or tools not provided by HID
- Accident, neglect, misuse or negligence
- Upgrades, evaluation units and demonstration units
- Consumables - batteries, paper, pads, cleaning solution, towels, cartridges and cables
Important Notes
This manufacturer warranty applies in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
HID's published policy states the warranty is solely for the benefit of the original end customer. Products purchased through Terry's Tradies Pty Ltd and its associated websites are covered as supplied - contact us in the first instance for any claim rather than approaching HID directly.
A small number of HID accessories (such as certain Signo mounting plates and wall spacers) are not individually named in HID's published policy. Where this applies, contact us to confirm the term that applies to your specific item before relying on the Lifetime cover shown above for readers.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
